|
PRC-101 |
PRC-101
Redundancy Switch Controller is a
multipurpose redundancy switch
controller for Encoder, Modulator,
Upconverter, Downconverter, LBN/LNA and
HPA in 1:1 redundancy configurations.
PRC-101’s
operation is based on detecting the
actual status (alarms or faults) from
the units alarm interface and switches
the problematic unit chain to Stand-by
unit.
The
controller can operate in automatic mode
or manual. In automatic mode, it can
work predefined rules, without any user
intervention. In manual mode, user can
control the switch without any limit.
The
controller is a 19” and 1RU unit is
equipped a with 2x40 character display,
keypad and status and alarms LED on
front panel, and Data In/Out ports on
rear panel. It is has dual power supply
to guarantee very high availability.
The PRC-101
can be managed locally on front panel or
remotely via RS232, RS485 or its user
friendly web interface (GUI) over
Ethernet port. |
|
|
Key Features |
Automatic or Manual Operation
Fast Response
Low Insertion Loss
Redundant power supply for failsafe
operation
Remote Control via IP over Ethernet or
RS-232, RS422/485.
Web Based Management
|
|
|
